Nationwide Servicing
Purchase Your Fire Extinguisher Servicing Online Now - Available Across The Country
Fire Equipment Servicing? Shop Now
Fire Equipment Servicing? Shop Now
Book a service
1 items added to basket
Fike 604-0008 TwinflexPro 8 Zone Fire Alarm Kit
INC VAT
Code: FIKEBI001/003
The Fike 604-0008 TwinflexPro 8 Zone Fire Alarm Kit is a 2-wire intelligent panel is ideal for bed & breakfasts, apartments / flats, houses in multiple occupation (HMO), restaurant, retail stores, historical buildings, museums and office buildings.
The alarm kit uses a conventional type cabling format with a system classed as analogue non-addressable due to the architecture. The Twinflex data protocol enables the devices to communicate with the control panel. The Twinflex can recognise and individually identify between heat detector, smoke detector and a manual call point alarm.
The alarm kit monitors each zone for detector head removal, device error, end of line fault and open or short circuit fault. The two monitored outputs can be configured as conventional sounder circuits, a volt free comon fire relay and a volt free common fault relay. Two multifunction latching / non-latching inputs and one monitored input programmable with options such as class-change and remote fire.
The kit incorporates an integral power supply unit which requires 2 x 12V 3.3Ah batteries to provide up to 72-hour standby times. The panel has a 500 event log, day/ night mode, alarm confirmation and delay programming options that can be configured using the keypad or via PC driven OSP software.
The Twinflex system needs one 2-core screened cable for each zone to accomodate both detection devices and sounders when using Twinflex devices.
Please Note: Requires 2 x 12V 3.2Ah Sealed Lead Acid Batteries (not included).
1 x Fike 8 Zone TwinflexPro² Panel
7 x Fike TwinflexPro Multipoint detectors with sounder
2 x Fike TwinflexPro Manual call points
1 x Fike TwinflexPro Head removal tool
2-wire intelligent panel
Conventional type cabling format
Can recognise and individually identify between heat detector, smoke detector and a manual call point alarm
Monitors each zone for detector head removal, device error, end of line fault and open or short circuit fault
Two monitored outputs can be configured
Two multifunction latching / non-latching inputs
One monitored input programmable
Integral power supply unit
500 event log, day/ night mode
Alarm confirmation and delay programming options
The Fike 604-0008 TwinflexPro 8 Zone Fire Alarm Kit is a 2-wire intelligent panel is ideal for bed & breakfasts, apartments / flats, houses in multiple occupation (HMO), restaurant, retail stores, historical buildings, museums and office buildings.
The alarm kit uses a conventional type cabling format with a system classed as analogue non-addressable due to the architecture. The Twinflex data protocol enables the devices to communicate with the control panel. The Twinflex can recognise and individually identify between heat detector, smoke detector and a manual call point alarm.
The alarm kit monitors each zone for detector head removal, device error, end of line fault and open or short circuit fault. The two monitored outputs can be configured as conventional sounder circuits, a volt free comon fire relay and a volt free common fault relay. Two multifunction latching / non-latching inputs and one monitored input programmable with options such as class-change and remote fire.
The kit incorporates an integral power supply unit which requires 2 x 12V 3.3Ah batteries to provide up to 72-hour standby times. The panel has a 500 event log, day/ night mode, alarm confirmation and delay programming options that can be configured using the keypad or via PC driven OSP software.
The Twinflex system needs one 2-core screened cable for each zone to accomodate both detection devices and sounders when using Twinflex devices.
Please Note: Requires 2 x 12V 3.2Ah Sealed Lead Acid Batteries (not included).
1 x Fike 8 Zone TwinflexPro² Panel
7 x Fike TwinflexPro Multipoint detectors with sounder
2 x Fike TwinflexPro Manual call points
1 x Fike TwinflexPro Head removal tool
2-wire intelligent panel
Conventional type cabling format
Can recognise and individually identify between heat detector, smoke detector and a manual call point alarm
Monitors each zone for detector head removal, device error, end of line fault and open or short circuit fault
Two monitored outputs can be configured
Two multifunction latching / non-latching inputs
One monitored input programmable
Integral power supply unit
500 event log, day/ night mode
Alarm confirmation and delay programming options
SK001/022
ex vat
FAC001/056
ex vat
8812
ex vat
FAEKIT2
ex vat
SB001/004
ex vat
Fire Protection Shop specialise in the supply of high-quality fire extinguishers. There are many different classifications of fire and so our products include a variety of different extinguisher types. For example, we offer water or foam fire extinguishers for solid combustibles and carbon dioxide fire extinguishers for flammable liquid or electrical fires. Each extinguishing agent comes with its benefits. Typically, water extinguishers are cheaper, produce a cooling effect and prevent reignition once the fire has been extinguished. Carbon dioxide extinguishers are clean agents, they leave no residue, are suitable for electrical fires and are often used on liquid fires which include petrol, oil or other solvents.
In addition to our extinguishers, we offer a range of fire safety products to both domestic and commercial premises. This includes the supply of fire blankets, extinguisher stands, smoke alarms, first aid kits and much more. Our entire range is sourced from reputable brand manufacturers at competitive prices. Also, all of our products carry a full warranty and guarantee and are supplied with relevant fixings where applicable.
So, for fire extinguishers, alarms and all your other fire safety needs, trust Fire Protection Shop to give you the quality, expertise and service you require.
We use cookies to enhance your site experience. Choose your preferences below.