Nationwide Servicing
Purchase Your Fire Extinguisher Servicing Online Now - Available Across The Country
Fire Equipment Servicing? Shop Now
Fire Equipment Servicing? Shop Now
Book a service
INC VAT
Code: FPS/DC110
Dycon D1410-Series units are 10 Amp switched-mode power supplies offering high-energy efficiency and versatility making them ideal for use in CCTV, Building Management Systems and a whole variety of other applications.
Dycon’s advanced switched-mode technology features integral output duty cycle control which only draws power when the load requires it. It produces very little heat enabling the D1410-Series units to be fitted into consoles, cupboards or small spaces where conventional fan-cooled power supplies would be too noisy.
The ten separate outputs are rated at 1A enabling 10 x 1A devices to be run off a single power source, reducing cabling and the need to install a number of power supply units. Should more power be required at an output, one or more can be linked together into a single output. Overcurrent and built-in electronic fuse protection for each individual output and the main unit is provided. Each output has its own external LED indicating operational status, this turns red when that output is shorted or overloaded making fault finding quick and easy. In addition to the 10 x 1A outputs there is a selectable single 10A output which can be connected to a wide variety devices via a D15X8 8-way or D15X4-BNC 4-way BNC splitter The D1410-B/C units are supplied in conventional, wall-mounted steel housings and a PCB-only version is also available for fitting into other equipment.
Power Supply: Type A, Ungraded, Environmental Class 2
Voltage Input: 230Vac +10% -15%; 50Hz ± 15%
AC Connection: PCB-mounted
Maximum Input Current: 1.2A
Output Voltage: 12Vdc Nominal
Output Ripple: < 500mV Peak-to-Peak at Full Rated Output
Output Current (Mode 1 Selectable): Single, Un-fused 10A continuously rated
Output Current (Mode 2 Selectable): 10 x 1A Electronically Fused Outputs; These Outputs Can Be Connected Together To Satisfy Higher Current Requirements
Output Duty Cycle Control: Only Draws Power when Required by the Load
Maximum Over-Voltage Cut-Out: 14.4Vdc ±3%
Operating Temperature Range: -10˚C to +40˚C
LED Indicators on Front of Housing: AC On (green);
LED Indicators on PCB: 10 x Individual Output Shorted or Overloaded (red)
Humidity: 95% Non-Condensing
PCB Size (D1410-P) (h x w x d): 126 x 160 x 66mm
Weight: PCB-0.19kg
Dycon D1410-Series units are 10 Amp switched-mode power supplies offering high-energy efficiency and versatility making them ideal for use in CCTV, Building Management Systems and a whole variety of other applications.
Dycon’s advanced switched-mode technology features integral output duty cycle control which only draws power when the load requires it. It produces very little heat enabling the D1410-Series units to be fitted into consoles, cupboards or small spaces where conventional fan-cooled power supplies would be too noisy.
The ten separate outputs are rated at 1A enabling 10 x 1A devices to be run off a single power source, reducing cabling and the need to install a number of power supply units. Should more power be required at an output, one or more can be linked together into a single output. Overcurrent and built-in electronic fuse protection for each individual output and the main unit is provided. Each output has its own external LED indicating operational status, this turns red when that output is shorted or overloaded making fault finding quick and easy. In addition to the 10 x 1A outputs there is a selectable single 10A output which can be connected to a wide variety devices via a D15X8 8-way or D15X4-BNC 4-way BNC splitter The D1410-B/C units are supplied in conventional, wall-mounted steel housings and a PCB-only version is also available for fitting into other equipment.
Power Supply: Type A, Ungraded, Environmental Class 2
Voltage Input: 230Vac +10% -15%; 50Hz ± 15%
AC Connection: PCB-mounted
Maximum Input Current: 1.2A
Output Voltage: 12Vdc Nominal
Output Ripple: < 500mV Peak-to-Peak at Full Rated Output
Output Current (Mode 1 Selectable): Single, Un-fused 10A continuously rated
Output Current (Mode 2 Selectable): 10 x 1A Electronically Fused Outputs; These Outputs Can Be Connected Together To Satisfy Higher Current Requirements
Output Duty Cycle Control: Only Draws Power when Required by the Load
Maximum Over-Voltage Cut-Out: 14.4Vdc ±3%
Operating Temperature Range: -10˚C to +40˚C
LED Indicators on Front of Housing: AC On (green);
LED Indicators on PCB: 10 x Individual Output Shorted or Overloaded (red)
Humidity: 95% Non-Condensing
PCB Size (D1410-P) (h x w x d): 126 x 160 x 66mm
Weight: PCB-0.19kg
Fire Protection Shop specialise in the supply of high-quality fire extinguishers. There are many different classifications of fire and so our products include a variety of different extinguisher types. For example, we offer water or foam fire extinguishers for solid combustibles and carbon dioxide fire extinguishers for flammable liquid or electrical fires. Each extinguishing agent comes with its benefits. Typically, water extinguishers are cheaper, produce a cooling effect and prevent reignition once the fire has been extinguished. Carbon dioxide extinguishers are clean agents, they leave no residue, are suitable for electrical fires and are often used on liquid fires which include petrol, oil or other solvents.
In addition to our extinguishers, we offer a range of fire safety products to both domestic and commercial premises. This includes the supply of fire blankets, extinguisher stands, smoke alarms, first aid kits and much more. Our entire range is sourced from reputable brand manufacturers at competitive prices. Also, all of our products carry a full warranty and guarantee and are supplied with relevant fixings where applicable.
So, for fire extinguishers, alarms and all your other fire safety needs, trust Fire Protection Shop to give you the quality, expertise and service you require.
We use cookies to enhance your site experience. Choose your preferences below.