Purchase Your Fire Extinguisher Servicing Online Now - Available Across The Country
1 items added to basket
Dycon 12(13.7)VDC 1 Amp PSU Multi Indicator in a IP65 Plastic Box
INC VAT
Code: FPS/DC046
Dycon’s D154X Series units are available as 1, 2, 3 and 5 Amp switched-mode power supplies, with three separate LED indicators that show the operational status of the unit. A green LED indicates that the Mains AC power is present, an orange LED lights when the unit is operating on standby battery power and a red LED lights if the electronic fuse has been tripped. These power supplies are protected against electrical ‘spikes’ caused by the switching of highly inductive loads (door strikes and locks). They remove the chance of inductive kickback blowing a fuse and causing a door to remain closed or open, a frequent cause of personnel delays and expensive engineer call outs.
The range also features intelligent and capacitive load switching surge protection and snubbing. Optional output splitters enable a single power supply to drive a wide variety of different devices. These include 8-way splitters with individually-fused outputs, 4-way splitters with electronically-fused outputs or individually glass-fused outputs. Available is also a special unit that can power up to 4 cameras with loop-through connections for video signals, making it ideally suited for use in powering CCTV systems.
The increasing demand for security and monitoring equipment to be used in external locations has meant installers and specifiers need to consider how best to power these devices locally and safely. Dycon has created a new IP65 climate-resistant housing system that can be used with the majority of its switched-mode power supply modules with or without battery back-up. The housing is thermo-resistant ABS and impact resistant to IK07/8, making it suitable for use in most external locations, it is also ideal for use in loft/roof spaces, garages, and warehouses.
Power Supply: Type A, Ungraded, Environmental Class 2
Voltage Input: 230VAC +10% -15%; 50Hz ± 15%
AC Input Current: 200mA
AC Input Fuse: 1A
Output Voltage with AC Power: Maximum 13.7VDC nominal
Output Ripple: < 100mV peak-to-peak at full rated output
Maximum Output Current @ Full Load: 1A
Battery Charging Current and Voltage: 300mA at 13.7VDC float charge voltage
Maximum Over-Voltage Cut-Out: 14.4VDC ±3%
Low Battery Fault: 11VDC ±3%
Low-Voltage Power Output Fault: 12.3VDC ±3%
Battery Deep Discharge Voltage Limit: 10VDC ±3%
Automatic Reset Time: 10ms to 18s (Depending on type of duration of fault)
Operating Temperature Range: -10˚C to +40˚C
Humidity: 95% non-condensing
Material: Thermo-resistant ABS
Construction: Double insulation, smooth walls
Material Sealing Class: EPDM
Protection: IP65 according to EN60529
Glow Wire Test: 650˚C
Impact Resistance: IK07, IK08
External Dimensions (L x W x H): 240 x 190 x 90mm
Carton Box dimensions: 250 x 205 x 95 mm
Colour: Light grey RAL7035
Fixing bracket: 2 x fixing bracket external powder coated 2mm steel
Lid: Fixed with 4 front screws
Weight: 1.45kg
Dycon’s D154X Series units are available as 1, 2, 3 and 5 Amp switched-mode power supplies, with three separate LED indicators that show the operational status of the unit. A green LED indicates that the Mains AC power is present, an orange LED lights when the unit is operating on standby battery power and a red LED lights if the electronic fuse has been tripped. These power supplies are protected against electrical ‘spikes’ caused by the switching of highly inductive loads (door strikes and locks). They remove the chance of inductive kickback blowing a fuse and causing a door to remain closed or open, a frequent cause of personnel delays and expensive engineer call outs.
The range also features intelligent and capacitive load switching surge protection and snubbing. Optional output splitters enable a single power supply to drive a wide variety of different devices. These include 8-way splitters with individually-fused outputs, 4-way splitters with electronically-fused outputs or individually glass-fused outputs. Available is also a special unit that can power up to 4 cameras with loop-through connections for video signals, making it ideally suited for use in powering CCTV systems.
The increasing demand for security and monitoring equipment to be used in external locations has meant installers and specifiers need to consider how best to power these devices locally and safely. Dycon has created a new IP65 climate-resistant housing system that can be used with the majority of its switched-mode power supply modules with or without battery back-up. The housing is thermo-resistant ABS and impact resistant to IK07/8, making it suitable for use in most external locations, it is also ideal for use in loft/roof spaces, garages, and warehouses.
Power Supply: Type A, Ungraded, Environmental Class 2
Voltage Input: 230VAC +10% -15%; 50Hz ± 15%
AC Input Current: 200mA
AC Input Fuse: 1A
Output Voltage with AC Power: Maximum 13.7VDC nominal
Output Ripple: < 100mV peak-to-peak at full rated output
Maximum Output Current @ Full Load: 1A
Battery Charging Current and Voltage: 300mA at 13.7VDC float charge voltage
Maximum Over-Voltage Cut-Out: 14.4VDC ±3%
Low Battery Fault: 11VDC ±3%
Low-Voltage Power Output Fault: 12.3VDC ±3%
Battery Deep Discharge Voltage Limit: 10VDC ±3%
Automatic Reset Time: 10ms to 18s (Depending on type of duration of fault)
Operating Temperature Range: -10˚C to +40˚C
Humidity: 95% non-condensing
Material: Thermo-resistant ABS
Construction: Double insulation, smooth walls
Material Sealing Class: EPDM
Protection: IP65 according to EN60529
Glow Wire Test: 650˚C
Impact Resistance: IK07, IK08
External Dimensions (L x W x H): 240 x 190 x 90mm
Carton Box dimensions: 250 x 205 x 95 mm
Colour: Light grey RAL7035
Fixing bracket: 2 x fixing bracket external powder coated 2mm steel
Lid: Fixed with 4 front screws
Weight: 1.45kg
Fire Protection Shop specialise in the supply of high-quality fire extinguishers. There are many different classifications of fire and so our products include a variety of different extinguisher types. For example, we offer water or foam fire extinguishers for solid combustibles and carbon dioxide fire extinguishers for flammable liquid or electrical fires. Each extinguishing agent comes with its benefits. Typically, water extinguishers are cheaper, produce a cooling effect and prevent reignition once the fire has been extinguished. Carbon dioxide extinguishers are clean agents, they leave no residue, are suitable for electrical fires and are often used on liquid fires which include petrol, oil or other solvents.
In addition to our extinguishers, we offer a range of fire safety products to both domestic and commercial premises. This includes the supply of fire blankets, extinguisher stands, smoke alarms, first aid kits and much more. Our entire range is sourced from reputable brand manufacturers at competitive prices. Also, all of our products carry a full warranty and guarantee and are supplied with relevant fixings where applicable.
So, for fire extinguishers, alarms and all your other fire safety needs, trust Fire Protection Shop to give you the quality, expertise and service you require.
We use cookies to enhance your site experience. Choose your preferences below.