Purchase Your Fire Extinguisher Servicing Online Now - Available Across The Country
Fire Equipment Servicing? Shop Now
We Recommend
Bestseller
from
INC VAT
Code: KENPAN001/001
The Kentec Sigma conventional fire alarm control panel RANGE comply with European standards BS EN54-2 and BS EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment and would be used where the fire alarm system comprises seperate detection and sounder circuits.
Suitable for use in all situations these panels are simple to install and requires the minimum of programming to set up.
2, 4 and 8 detection zones
2 Sounder output circuits
Fully programmable using simple menu options
Adjustable sounder delay time
3 On-board relay outputs
Class change input
Sounder configuration options
Zonal sounder delay detectors only
Zonal sounder delay call points only
Coincidence input selection
I.S Barrier selection by zone
Short circuit fire by zone
Non latching zones
Silent zones
Zone input delay
General panel configuration
Active EOL included
Construction | 1.2mm mild sheet steel |
IP Rating | IP30 |
Finish | Epoxy powder coated |
Supply Voltage | 230V AC (+10%/-15%) |
Mains supply fuse | 1.6 Amp 250V |
Power supply DC rating | 24V 3 Amps |
Cable capacity | 2.5mm² per terminal |
Operating temperature | -5°C to +40°C |
Operating humidity | <95% (non condensing) |
The Kentec Sigma conventional fire alarm control panel RANGE comply with European standards BS EN54-2 and BS EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment and would be used where the fire alarm system comprises seperate detection and sounder circuits.
Suitable for use in all situations these panels are simple to install and requires the minimum of programming to set up.
2, 4 and 8 detection zones
2 Sounder output circuits
Fully programmable using simple menu options
Adjustable sounder delay time
3 On-board relay outputs
Class change input
Sounder configuration options
Zonal sounder delay detectors only
Zonal sounder delay call points only
Coincidence input selection
I.S Barrier selection by zone
Short circuit fire by zone
Non latching zones
Silent zones
Zone input delay
General panel configuration
Active EOL included
Construction | 1.2mm mild sheet steel |
IP Rating | IP30 |
Finish | Epoxy powder coated |
Supply Voltage | 230V AC (+10%/-15%) |
Mains supply fuse | 1.6 Amp 250V |
Power supply DC rating | 24V 3 Amps |
Cable capacity | 2.5mm² per terminal |
Operating temperature | -5°C to +40°C |
Operating humidity | <95% (non condensing) |
SK001/022
ex vat
FAC001/056
ex vat
8812
ex vat
FAEKIT2
ex vat
SB001/004
ex vat
Fire Protection Shop specialise in the supply of high-quality fire extinguishers. There are many different classifications of fire and so our products include a variety of different extinguisher types. For example, we offer water or foam fire extinguishers for solid combustibles and carbon dioxide fire extinguishers for flammable liquid or electrical fires. Each extinguishing agent comes with its benefits. Typically, water extinguishers are cheaper, produce a cooling effect and prevent reignition once the fire has been extinguished. Carbon dioxide extinguishers are clean agents, they leave no residue, are suitable for electrical fires and are often used on liquid fires which include petrol, oil or other solvents.
In addition to our extinguishers, we offer a range of fire safety products to both domestic and commercial premises. This includes the supply of fire blankets, extinguisher stands, smoke alarms, first aid kits and much more. Our entire range is sourced from reputable brand manufacturers at competitive prices. Also, all of our products carry a full warranty and guarantee and are supplied with relevant fixings where applicable.
So, for fire extinguishers, alarms and all your other fire safety needs, trust Fire Protection Shop to give you the quality, expertise and service you require.
We use cookies to enhance your site experience. Choose your preferences below.